What Clients Actually want to See in a Client Link Report

Instead, a client link report is often built for the wrong reader. It's packed with authority scores, charts and averages, because those are easy to export. Then the client skims it, asks "so are the links still there?" on the next call, and you realise the report never answered the question they actually had.
In addition, after a lot of report calls, I've come to think a good client link report is short and answers four questions. Everything else is optional. Meanwhile, this guide covers what those questions are, what to include for each, and what you can safely cut.
Key takeaways on a client link report
- A client link report should answer four questions: what went live, is it still live, what changed and what's next.
- Lead with live links, not total links built.
- Cut metrics the client never asks about.
- Also, let clients check the links themselves with a live, read-only view.
What clients actually ask about a client link report
Rather, listen to report calls and the same questions come up again and again.
- What did we get this month? New links, where they are, and why those sites.
- Are the links still there? Including the ones from previous months.
- Did anything go wrong? Lost links, broken pages, anything changed.
- What happens next? Next month's plan and anything the client needs to do.
Notice what's missing. Very few clients ask for an average authority score, a chart of referring domains, for example, or a list of anchor types. Those can still be useful, but they belong further down, or in an appendix.
What to include in a client link report
Build the report around those four questions. Here's what each section needs.
New links this month
Still, for each new link: the source page (as a clickable URL), the target page, the anchor, the link type and a one-line note on why that site was chosen. Keep the note human. "Popular guide read by small-business owners" tells a client more than a number.
Live links overall
Meanwhile, a single line: how many of the links you've built are live today. This is the number that protects you. On the other hand, a report that only counts links built overstates results the moment one disappears.
Changes since last report
List any link that's now Lost, Broken or changed to nofollow, for example, with what you're doing about each. Google's guidance on qualifying outbound links explains nofollow, sponsored and ugc if a client asks why a link type changed.
Next steps
Two or three bullet points on next month's focus, plus anything you need from the client, such as approval of a new target page.
What to cut from a client link report
Cutting is harder than adding. These are the usual candidates.
- Metrics nobody discusses. If a chart hasn't come up in three calls, move it to an appendix or drop it.
- Sitewide totals from backlink indexes. Instead, these include links you didn't build and change for reasons unrelated to your work. They confuse more than they inform.
- Long methodology sections. Explain your approach once, at the start of the relationship, then link to it.
- Raw exports. A spreadsheet of hundreds of rows is not a report. Offer it as an attachment if the client wants it.
If clients want to see their wider profile, Google's own Links report in Search Console is a good, neutral source they can check themselves.
How to lay out a client link report
Order matters. In other words, put the answer to the client's biggest question first.
- Summary box. Still, live links today, new links this month, changes, and one sentence on next month.
- New links table. Source, target, anchor, type, note.
- Changes. As a result, lost, Broken or Nofollow links and the follow-up for each.
- Next steps.
- Appendix. Anything else the client has asked to see.
Our link building report template gives you a ready-made version of this layout.
Make the client link report checkable
As a result, the most convincing client link report is one the client can verify without asking you. Clickable source URLs are the start. A live, read-only view is better, because it always shows the current status rather than the status on the day you exported it.
In SEOENV, a client share link gives clients a read-only view of their links with no login. It's available on every plan. On the Growth plan, Report Branding adds your logo and colours.
How often to send a client link report
Monthly suits most retainers. On the other hand, it's frequent enough that changes don't pile up and infrequent enough that each report has something to say. Whatever the cadence, run a fresh check of every link before you send it, so the client link report matches what the client would see if they clicked every link that morning.
For more on what to measure behind the scenes, see our guide to link building KPIs.
A note on tone
Of course, a client link report is a piece of client communication, not just data. Also, write it the way you'd explain the month on a call: plain words, no jargon, and the bad news stated as clearly as the good. Clients trust reports that admit a lost link far more than reports where nothing ever goes wrong.
Common mistakes that make reports harder to trust
A few habits quietly undermine reports, even when the work behind them is good.
- Counting links that were never confirmed live. If a link is still pending, say so. Clients notice when a "new link" turns out to be a draft.
- Dropping lost links from the list. Quietly removing them makes the total look steady, but a client who checks will find the gap. After that, keep them, mark them lost, and note what you're doing about it.
- Changing the format every month. Clients compare reports side by side. If the columns move, they can't see the trend.
- Mixing your work with links you didn't build. In fact, search Console and backlink tools show the whole profile. Your report should cover your delivery, and say so.
Each of these is also easy to fix once you spot it, and each one makes the next conversation easier.
A short checklist before you send it
Run through this before the report goes out:
- Every new link has been checked live in the last few days.
- Lost or changed links are listed with a next step.
- Totals match the row count in the link list.
- The share link opens and shows the current statuses.
- The summary at the top fits in three sentences.
Meanwhile, it takes a few minutes and saves a lot of back-and-forth.
Frequently asked questions about a client link report
What should a client link report include?
New links with source, target, anchor and type; the number of links live today; any changes since last report; and next steps.
What should I leave out of a link building report?
In fact, metrics the client never asks about, sitewide index totals, long methodology sections and raw exports.
How often should I send a client link report?
Monthly works for most retainers. Check every link before sending so the report reflects today.
Should clients be able to check the links themselves?
Yes. Clickable URLs and a read-only live view build more trust than screenshots or static spreadsheets.
Wrap-up and sources
Finally, use these primary sources to check anything in this guide:
- Google Search Central: Qualify your outbound links
- Google Search Console Help: Links report
- Because of that, Google Search Central: Creating helpful, reliable, people-first content
How we wrote this guide. Kritika Das wrote it from day-to-day work logging and checking link exchanges, guest posts and paid placements, for example, and checked each claim against the sources above. We update it when Google changes its guidance.
Build the report from live statuses
SEOENV's Link Status Report shows Active, Pending, Lost and Broken links per client (Starter plan and up).
Article written by
Kritika Das
Head of Marketing at SEOENV · Forbes-featured content writer
In other words, kritika Das is Head of Marketing at SEOENV and a Forbes-featured content writer. For example, she writes about the operations side of link building: how agencies, freelancers and in-house teams log, check and report the links they build. Her guides come from day-to-day work with link builders and are checked against Google’s own documentation.


Leave A Comment