When a Guest Post Editor Changes Your Link: What to Do

A guest post editor has the final say over what appears on their site, and that includes your link. So it's common to find that the anchor, the target page or the link type changed between your draft and the published post. Sometimes the link is removed altogether. Most of these edits are reasonable, but some are worth a polite question.
This guide covers the changes a guest post editor might make, how to spot them, when to accept them and how to ask about them.
Key takeaways on a guest post editor changing your link
- A guest post editor can change the anchor, the target, the rel value or remove the link.
- Check the live link against what you agreed as soon as the post is published.
- Many edits are reasonable, so accept them unless they break what was agreed.
- Ask politely and factually when a change matters, and record the outcome.
The changes a guest post editor makes
The anchor text
Editors often rewrite anchors, especially keyword-heavy ones. For example, "best project management software" might become "this comparison of project tools". That's usually an improvement, since descriptive anchors read better. It also lines up with Google's link spam policies, which mention keyword-rich anchors in large-scale guest posting.
The target page
Sometimes an editor swaps your target for a different page, such as your homepage instead of a deep guide. They may do this because the original page looked too commercial, or simply because they preferred a broader link. However, if the new target isn't relevant to the article, then the link helps nobody.
The rel value
In addition, many sites add nofollow, or sometimes sponsored, to outbound links from contributors. Google's guide to qualifying outbound links explains when sites use these values. So if the site's policy is to qualify contributor links, that's their choice, even if you hoped for a followed link.
The placement
An editor may also move your link from the body into the author bio, or the other way round. Our guide on what to check after a guest post goes live covers how to confirm the new placement.
Removal
Finally, an editor may remove the link entirely, often because it felt promotional or didn't support the article. Since they still published your post, it's worth asking whether a link elsewhere, such as in the bio, would be acceptable.
How to spot the change
Check the live post as soon as it's published. Then compare the link against what you submitted: the anchor, the target URL, the rel attribute and the placement. Viewing the link in the browser's inspector shows the exact href and rel values, so you're not relying on how it looks.
Then record what you found. If you don't record the published version, you won't know later whether the link changed at publication or months afterwards.
Which guest post editor changes to accept
In general, most changes from a guest post editor are worth accepting. A rewritten anchor that still describes the target is fine. A link moved into the bio is usually fine too, as long as it's still there. And a nofollow added by site policy is the site's decision, so arguing rarely helps.
However, some changes undermine what was agreed. If you agreed a specific target in writing and the editor replaced it with an unrelated page, then it's reasonable to ask. Similarly, if the link was removed entirely without explanation, a polite question makes sense.
How to ask a guest post editor about a change
So keep it short, factual and friendly. Thank the guest post editor for publishing the article first, and then mention the change without accusing anyone. For example: "Thanks for publishing the article. I noticed the link now points to our homepage rather than the guide we discussed. Would it be possible to switch it back, since the guide matches the section better?"
If the editor says no, accept it. Pushing further rarely helps, and it may close the door for future posts. Instead, record the outcome and decide whether to pitch that site again.
Agree link details with the guest post editor first
Many surprises disappear when you agree the link details up front. So when the editor accepts your pitch, confirm the target, a descriptive anchor, the placement and whether the site qualifies contributor links. Then nobody is surprised at publication, because everything was clear from the start.
Even then, policies change. A site may later add nofollow to all contributor links, or an editor may update an old post. As a result, checking only at publication isn't enough.
Watch for changes after publication
Links can change long after the guest post editor signs off. That's because redesigns, CMS migrations and content audits all touch old posts. So check each guest post link on a schedule, not just once.
SEOENV's Guest Posts workspace tracks each article from Pitched to Published, and the link it carries is then checked on its page, daily on paid plans (Starter+), with Check all on every plan. If the anchor changes, the target moves or the link turns nofollow, the check records it, so you can see what changed and when. Our guide on links changed to nofollow covers that case in detail.
A quick example
Picture a marketer who publishes a guest post with a link to a pricing guide. When they check the live post, the guest post editor has changed the anchor to something generic and moved the link to the bio. Since the anchor still describes the guide, and the link is still there, they accept it and update their record. Six months later, a routine check shows the link has turned nofollow during a site redesign. Because they recorded the published version, they can see exactly when it changed, and they decide it's the site's policy rather than worth chasing.
Why recording the published link matters
In short, the published version is your baseline. Without it, you can't tell whether a link was changed by the guest post editor at publication or later during a redesign. So log the live URL, anchor, target and rel value on the day the post goes live, and then let regular checks compare against it.
Frequently asked questions about a guest post editor changing your link
Can a guest post editor change my link?
Yes. Editors control what appears on their site, including anchors, targets, link types and placement.
Should I ask an editor to change my link back?
Only when the change breaks what was clearly agreed, and then ask once, briefly and politely.
Why did my guest post link become nofollow?
Many sites qualify contributor links by policy, and some add nofollow later during redesigns or audits.
How do I know if my guest post link changes later?
Record the published version, then check the link on its page on a regular schedule.
Wrap-up and sources
Use these primary sources to check anything in this guide:
How we wrote this guide. Kritika Das wrote it from day-to-day work logging and checking link exchanges, guest posts and paid placements, and checked each claim against the sources above. We update it when Google changes its guidance.
See when a guest post link changes
SEOENV checks each guest post link on its page and records changes to anchor, target and link type.
Article written by
Kritika Das
Head of Marketing at SEOENV · Forbes-featured content writer
Kritika Das is Head of Marketing at SEOENV and a Forbes-featured content writer. She writes about the operations side of link building: how agencies, freelancers and in-house teams log, check and report the links they build. Her guides come from day-to-day work with link builders and are checked against Google’s own documentation.


Leave A Comment