How to Explain Lost Links to Clients Without Losing Their Trust

If you need to explain lost links to a client, the hardest part has usually already happened: they found one before you did. That's when a lost link feels like poor work rather than a normal part of the job. Told first, with a plan, the same loss barely registers.
This guide gives you a simple structure to explain lost links, example wording you can adapt, and a few habits that make the conversation easier every month after.
Key takeaways on how to explain lost links
- Clients lose trust when they find lost links themselves, not when you tell them first.
- Instead, explain lost links in four parts: what happened, why, what you're doing and what changes.
- Separate Lost from Broken, because the fix and the conversation differ.
- Set expectations about link lifespans before the first loss.
Why it matters how you explain lost links
Links disappear for ordinary reasons. Publishers prune old posts, refresh articles and move sites. None of that is your fault, and most clients understand it when it's explained well.
What damages trust is surprise. A client who clicks a link from last quarter's report and lands on an error page starts to wonder what else is wrong. The loss itself is small. The doubt it creates is not. So the goal is to explain lost links before they're discovered, in a way that shows you're on top of it.
A four-part way to explain lost links
Keep every explanation to these four parts. It works in an email, a report note or a call.
1. What happened
State it plainly. "Two links from last quarter are no longer live. Meanwhile, one page now returns an error, and on the other the link has been removed."
2. Why it happens
One or two sentences of context. "Publishers regularly update and remove older content. In other words, a small number of changes like this is normal for any active link profile." Don't over-explain, and don't blame the publisher.
3. What you're doing
This is the part clients care about most. "We've contacted both editors. For the deleted page, we've asked whether a redirect or a related post is possible. If neither link comes back within two weeks, we'll replace them with new placements."
4. What changes
Show you've learned something where there's something to learn. "One of these was on a site that has removed several guest posts recently, so we won't place further links there."
Explain lost links differently depending on the cause
The status tells you which conversation to have.
Lost means the page still loads but the link has gone. That's usually an edit or a refresh, and it's a partner conversation. You can often get it back with a polite request.
Broken means the page itself no longer loads. That's a site problem. Google's documentation on HTTP status codes explains how errors affect crawling, and a redirect is the clean fix if the page moved.
Changed to nofollow means the link is still there but qualified. That's a policy or agreement conversation. Google explains the values in its guide to qualifying outbound links. Sometimes it's expected, sometimes it breaks what was agreed.
Clients don't need the technical detail, but separating the causes makes your plan sound specific rather than vague.
Example wording when you explain lost links in a report
Here's a short note that fits at the top of a monthly report:
Link changes this month. [X] of the links we've built for you are live. Even so, two changed: one page was deleted by the publisher and one link was removed in an article update. We've asked both editors to restore them. If they can't, we'll replace them in next month's work. Nothing else needs your attention.
Fill in your own totals. The structure is what matters: total live, what changed, what you're doing, and whether the client needs to act.
Habits that make it easier to explain lost links
- Set expectations at the start. On the other hand, in the first month, explain that some links will change over time and how you'll handle it.
- Report live links, not just built links. A report that shows what's live today never overstates your results.
- Check before every report. Run a fresh check so your numbers match what the client would see if they clicked.
- Share a live view. A read-only client share link lets clients see current statuses whenever they want, which removes the fear of what they might find.
- Keep the follow-up record. Note what you asked each editor and when, so you can explain lost links with facts if a client asks later.
Our link building report template shows where a link-changes section fits in a monthly report.
Building lost links into your link reporting
The easiest way to explain lost links is to make them a standing part of your link reporting. Add a short "changes this month" section to every report, even when nothing changed. Clients get used to seeing it, and a month with two lost backlinks reads as routine rather than alarming.
It also improves client communication in general. When a client knows they'll see every change, they stop spot-checking links themselves. That saves both of you time, and it shifts the relationship from suspicion to shared tracking.
When a client is already upset
If the client found the lost link first, start by acknowledging it. "You're right, that link is gone, and we should have flagged it before you saw it." Then move straight into the four parts. Avoid long explanations of how the web works. A specific plan calms people faster than context.
Afterwards, fix the process gap that let it happen, usually a missing check before reporting. Then tell the client what you changed. That last step often rebuilds more trust than the original report ever had.
Frequently asked questions about how to explain lost links
How do I explain lost links to a client?
Say what happened, why it happens, what you're doing about it and what changes as a result. Keep it short and lead with the plan.
Should I tell clients about every lost link?
Yes, briefly. In other words, a short note in each report keeps them informed and means they never discover a loss on their own.
What is the difference between a lost and a broken link?
A lost link means the page loads but your link has gone. A broken link means the page itself no longer loads.
Will a client always expect lost links to be replaced?
Not always. Agree up front how you'll handle losses, whether that's reclamation first, replacement, or both.
Wrap-up and sources
Use these primary sources to check anything in this guide:
- Google Search Central: HTTP status codes and Google
- Google Search Central: Redirects and Google Search
- Google Search Central: Qualify your outbound links
How we wrote this guide. Kritika Das wrote it from day-to-day work logging and checking link exchanges, guest posts and paid placements, for example, and checked each claim against the sources above. We update it when Google changes its guidance.
Spot lost links before your client does
Of course, SEOENV checks every logged link and shows Active, Lost, Broken or Pending, daily on paid plans.
Article written by
Kritika Das
Head of Marketing at SEOENV · Forbes-featured content writer
In fact, kritika Das is Head of Marketing at SEOENV and a Forbes-featured content writer. Still, she writes about the operations side of link building: how agencies, freelancers and in-house teams log, check and report the links they build. Her guides come from day-to-day work with link builders and are checked against Google’s own documentation.


Leave A Comment