Link Swap Checklist: What to Check Before and After a Swap

A link swap checklist helps you run every exchange the same careful way. Without one, swaps tend to happen on a quick yes: a partner offers a link, you add one back and nobody checks again. As a result, one side's link may vanish while the other stays up, or a swap may fit neither site's readers.
So this guide gives a simple checklist for three stages: before you agree, when links go live and in the months after.
Key takeaways on link swap checklist
- In short, a link swap checklist covers three stages: before the swap, at go-live and after placement.
- Before agreeing, check relevance, quality and how many swaps you already run.
- Also, confirm both links at go-live, including anchor and follow status.
- Finally, keep checking afterwards, because swap links can change or disappear.
Why use a link swap checklist
Link swaps look simple, but there are several ways they go wrong. For example, the partner's site may be unrelated, the anchor may be forced or the link may be removed after a month. Also, too many swaps can create a pattern that Google's link spam policies warn about, since excessive link exchanges are listed there.
Because a checklist makes each step routine, you catch these problems before they cost you. In addition, a written list helps a team work the same way, even when different people handle different partners.
Before the swap: check the partner
First, check whether the partner's site is relevant to your page. If a reader on their page wouldn't care about your link, the swap probably doesn't make sense. Then check quality: is the content written for readers, does the site have real traffic and does it link out sensibly? Our guide on how to vet a link partner covers these checks.
Also check the page where your link would go. For instance, is it indexed, is it in the main content and is it a page people actually visit? A link on a buried page adds little.
Before the swap: check your own side
Next, look at your side of the exchange. For example, where would you place their link, and does it help your readers? Similarly, how many swaps does your site already have? If many of your outbound links are part of exchanges, adding more increases the risk. Our guide on how many link exchanges are too many explains how to judge this.
Then agree the details on your link swap checklist: which pages, which anchors and when each link goes live. A short written agreement avoids confusion later.
Link swap checklist for anchors
Anchor text needs its own line on the link swap checklist. In practice, swaps often push for exact-match anchors, because each side wants the keyword. However, a page with many keyword anchors from exchanges looks unnatural. So agree descriptive anchors that fit the sentence, following Google's guidance on anchor text.
Also vary anchors across partners. Our guide on anchor text ratios covers how to keep the mix natural.
At go-live: confirm both links
When links go live, check both sides, not only yours. For instance, confirm that your link is on the agreed page, uses the agreed anchor and has the expected follow status. Then confirm that their link is live on your site as promised. Because swaps depend on fairness, a missing link on either side matters.
Also note the go-live date for each link. Later, if one disappears, you'll know how long it lasted. In addition, add a line to your link swap checklist for screenshots or saved copies of both pages, since these help if a partner later disputes what was agreed. Then store them with the swap record, so anyone on the team can find them quickly.
After placement: keep checking
Most swap problems appear after go-live. For example, a partner redesigns their site and drops old links, an editor changes your link to nofollow or a page is deleted. So keep checking each link on its page over time. Our guide on how often to check backlinks explains a sensible schedule.
SEOENV's Master Link Exchange tracks both sides of every swap, and SEOENV checks each link on its page, daily on paid plans (Starter+), with Check all on every plan. Also, for three-way swaps, ABC Link Exchange records how the links connect.
When a link swap goes one-sided
Even with a checklist, some swaps become one-sided. For instance, your link disappears while theirs stays up. In that case, contact the partner politely, share the page URL and ask whether it was removed on purpose. If it was a mistake, they'll usually restore it. However, if they don't reply, decide whether to keep their link. Our guide on one-sided link exchanges covers how to handle this.
The full link swap checklist
Here's the link swap checklist in one place. Before the swap: relevant partner, quality site, visible page, sensible number of existing swaps, agreed pages and anchors. At go-live: both links live, correct anchors, expected follow status, dates recorded. After placement: regular checks, quick follow-up on changes and a periodic review of each partner. Then, every few months, look at all your swaps together and drop any that no longer fit. Our guide on when to drop a link partner explains how to decide.
A quick example
Picture an agency that agrees a swap between a client's gardening blog and a partner's outdoor furniture site. Before agreeing, the agency checks relevance and quality, then confirms the client's site has only a few existing swaps. So both sides agree descriptive anchors and go-live dates. At go-live, the agency confirms both links. Then, four months later, its checks show the partner's link to the client has become nofollow. As a result, the agency contacts the partner, who restores the original link within a week.
Common mistakes with link swaps
The most common mistake is agreeing a swap on a quick yes without checking the partner. Another is checking only your own link at go-live. A third is never checking again after placement. Finally, many teams push for exact-match anchors in every swap, which creates the pattern they should avoid.
Frequently asked questions about link swap checklist
What should a link swap checklist include?
Partner checks before the swap, link checks at go-live and regular checks after placement.
Should I check the partner's link as well as mine?
Yes. A swap depends on both links staying live as agreed.
How often should I check swap links?
Regularly over time, since links can change or disappear months after go-live.
What anchor should I use in a swap?
A descriptive anchor that fits the sentence, rather than an exact-match keyword.
Wrap-up and sources
Use these primary sources to check anything in this guide:
- Google Search Central: Spam policies (link spam)
- Google Search Central: Link best practices (anchor text)
How we wrote this guide. Kritika Das wrote it from day-to-day work logging and checking link exchanges, guest posts and paid placements, and checked each claim against the sources above. We update it when Google changes its guidance.
Track both sides of every swap
SEOENV records each exchange in full and checks every link on its page, so you see when one side changes.
Article written by
Kritika Das
Head of Marketing at SEOENV · Forbes-featured content writer
Kritika Das is Head of Marketing at SEOENV and a Forbes-featured content writer. She writes about the operations side of link building: how agencies, freelancers and in-house teams log, check and report the links they build. Her guides come from day-to-day work with link builders and are checked against Google’s own documentation.


Leave A Comment